人物简介
  • 姓        名:郭靖
  • 职        务:副教授
  • 电子邮件: guojing@ustb.edu.cn
  • 办公电话: 010-62332422                      传        真:

  • 本科课程: 冶金物理化学

  • 研究生课程: 冶金热力学理论和应用

  • 科研方向: 纯净钢技术;
    特种冶金技术;
    夹杂物和钢中第二相控制和表征;
    金属基复合材料


  • 个人简介
  • 成就及业绩

  • 2005.09-2009.07,澳门新威利斯(中国)集团有限公司,冶金工程专业,学士。

    2009.09-2015.01,澳门新威利斯(中国)集团有限公司,冶金工程专业,博士。

    2015.03-2016.03,韩国浦项工科大学(POSTECH),材料科学与工程集团,材料科学与工程,博士后。

    2016.03-2020.06,集团,澳门新威利斯,讲师。

    2020.06-至今,集团,澳门新威利斯,副教授。



    代表性论著:

    [1] Jing Guo, Shaowei Han, Xingrun Chen, eta al. Control of Non-metallic Inclusion Plasticity and Steel Cleanliness for Ultrathin 18 Pct Cr-8 Pct Ni Stainless Steel Strip. Metall. Mater. Trans. B, 2020,48B, online.

    [2] Jing Guo, M.D.Seo, J.W. Cho et al. Control of Crystal morphology for Mold Flux during High-Aluminum AHSS Continuous Casting Process. Metall. Mater. Trans. B, 2016,47B(4):2211-2221

    [3]郭靖,方克明,郭汉杰等,钢中第二相粒子形貌的预报理论和检测方法,金属学报,2017,53(7) :789-796. IF 0.704

    [4] Jing Guo, K M Fang, Guo Han et al. Determination of three-dimensional morphology and inner structure of second-phase inclusions in metals by non-aqueous solution electrolytic and room temperature organic methods[J]. Metals. 2018,8(1),68. IF 1.704 [5]Guo Jing, Cheng S, Guo H, Mei Y . Novel mechanism for the modification of Al2O3-based inclusions in ultra-low carbon Al-killed steel considering the effects of magnesium and calcium[J]. International Journal of Minerals, Metallurgy, and Materials, 2018, 25(3): 280-287.

    [6]Guo Jing, Yang W S, Shi Xiao, et al. Effect of Sulfur Content on the Properties and MnS Morphologies of DH36 Structural Steel. Metals. 2018, 8(11),945.

    [7]Guo Jing, Cheng Shu-sen, Guo Hanjie et al. Determination of non-metallic inclusions in a continuous casting slab of ultra-low carbon interstitial free steel by applying of metallographic method, electrolytic method and RTO technique. Scientific report.2019, 9(2),2929

    [8] Guo Jing, Cheng Shu-sen, Guo Hanjie et al.Thermodynamics and Industrial Trial on Increasing the Carbon Content at the BOF Endpoint to Produce Ultra-Low Carbon IF Steel by BOF-RHCSP Process. HIGH TEMPERATURE MATERIALS AND PROCESSES,2019,38,822-826.

    [9]Guo Jing ,Chen X.R, Han S.W, Yan Y, Guo, H.J. Evolution of plasticized MnO-Al2O3-SiO2-based nonmetallic inclusion in 18wt%Cr-8wt%Ni stainless steel and its properties during soaking process. INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS. 2020,27(3):328-339.

    [10] Guo Jing, Cheng Shu-sen, Cheng Zi-jian. Mechanism of Non-metallic Inclusion Formation and Modification and Their Deformation during CSP Process for Aluminum-Killed Steel [J]. ISIJ. Int., 2013, 53(12): 2142-2151.

    [11] Guo Jing, Cheng Shusen, Zhao Hongbo, Du Pengyu, Pan Hongwei. A Mechanism Model for Raceway Formation and Variation. Metallurigical and Materials Transactions B,2013,44B(3),487.

    [12] Guo Jing, Cheng Shusen, Cheng Zi-jian,Xin Lei. Thermodynamics for Precipitation of CaS Bearing Inclusion and Their Deformation During Rolling Process for Al-killed Ca-treated Steel [J]. Steel Res. Int., 2013, 84 (6): 545-553.

    [13] Guo Jing, Cheng Shusen, Cheng Zijian. Characteristics of Deoxidation and Desulfurization during LF Refining for low carbon Al-killed steel [J]. Journal of Iron and Steel Research International,2014, 21(2):166-173.

    [14] 郭靖,程树森,程子建,等. 铝镇静钢钙处理后氧化铝夹杂物变性动力学模型. 集团学报,2014,36(4) 424-431.

    [15] 郭靖,程树森,程子建,等. CSP流程低碳低硅铝镇静钢精炼渣成分优化[J]. 集团学报,2014,36(sup1): 194-199.

    [16]郭靖,程树森,李积鹏,颜坤,梅亚光. CSP流程低碳铝镇静钢铸坯碳覆夹杂物析出行为[J].钢铁研究学报,2016,28(04):21-27.

    [17]郭靖,程树森,程子建,等. 铝镇静钢钙处理后碰撞行为对Al2O3夹杂物变性的作用[J]. 钢铁,2013, 48(9): 37-44.

    [18] 郭靖,程树森,程子建,等. 酒钢CSP流程SPCC钢夹杂形成机理研究[J]. 过程工程学报,2013,12(4):314-320.